Jebel Ali Industrial 1, Dubai, United Arab Emirates

Contact Time Sun-Thu: 9.00 - 06.00
Contact Email [email protected]
Phone Number +971 43236309

Jebel Ali Industrial 1, Dubai, United Arab Emirates

Contact Time Sun-Thu: 9.00 - 06.00
Contact Email [email protected]
Phone Number +971 43236309

BD Series (T6CC/T67CB Denison/Parker)

Category:

Description

Versatility, power, compactness and low running costs are the main characteristics
of BD vane pumps.
All the components subject to wear are contained in a cartridge unit that can be
easily removed for inspection and/or replacement without disconnecting the
pump from the circuit, drastically reducing expensive machine down time.
The cartridge contains a rotor, vanes and pins, a cam ring and two supports.
During operation the rotor is driven by a spline shaft coupled to the drive unit.
As the rotation speed increases, centrifugal forces, in combination with the pressure
generated behind the vanes, push the vanes outwards, where they follow the profile
of the cam with a sufficient contact pressure to ensure adequate hydraulic sealing.
The two opposed pumping chambers formed by the elliptical profile
of the cam cancel out radial loads on the shaft bearings, thereby giving them
extremely long lifetimes.

Specification

The BD series is available in three versions of single pump (from 10 to 227 l/min at 1000 rpm) and four versions of double pump (from 20 to 385 l/min total, at 1000 rpm), with input powers of over 328 KW at max pressure and speed.
The BD series pumps are extremely compact and are supplied with SAE norm hydraulic flanges and shafts.
This makes them very easy to install and guarantees their interchangeability with other similar pumps.

 

 

 

Specification

The HQ series is available in 2 versions of single pump (from 39 to 88 l/min at 1000 rpm) and two versions of double pump (from 46 to 134 l/min at 1000 rpm) with maximum powers of over 103 kW.
The pumps are extremely compact and are supplied with different types of either ISO or UNI norm mounting for the direct coupling with PTO and SAE norm hydraulic fittings.
That, together with the possibility to orientate the inlet and outlet ports, makes the HQ pumps very easy to install and guarantees their interchangeability with other types of pumps.

Reviews

There are no reviews yet.

Be the first to review “BD Series (T6CC/T67CB Denison/Parker)”

Your email address will not be published.

© 2019 Globetech All Rights Reserved.