Jebel Ali Industrial 1, Dubai, United Arab Emirates

Contact Time Sun-Thu: 9.00 - 06.00
Contact Email [email protected]
Phone Number +971 43236309

Jebel Ali Industrial 1, Dubai, United Arab Emirates

Contact Time Sun-Thu: 9.00 - 06.00
Contact Email [email protected]
Phone Number +971 43236309

BV Series (Eaton Vickers)

Category:

Description

Versatility, power, compactness and low running costs are the main characteristics
of B&C vane pumps.
All the components subject to wear are contained in a cartridge unit that can be easily
removed for inspection and/or replacement without disconnecting the pump from the
circuit, drastically reducing expensive machine down time.
The cartridge contains a rotor, vanes and inserts, a cam ring and two covers.
During operation the rotor is driven by a splined shaft coupled to the drive unit.
As the rotation speed increases, centrifugal forces, in combination with the pressure
generated behind the vanes, push the vanes outwards, where they follow the profile
of the cam of the ring with a sufficient contact pressure to ensure adequate hydraulic
sealing.
The two opposed pumping chambers formed by the elliptical profile of the cam
cancel out radial loads on the shaft bearings, thereby giving them extremely long
lifetimes.

 

Specification

The BV series is available in four versions of single pump (from 8 to 230 L/min at 1200 rpm) and six versions of double pump (from 55 to 370 L/min at 1200 rpm), with maximum powers of over 300 HP.
The BV series pumps are extremely compact and are supplied with ISO norm mechanical couplings and SAE norm hydraulic fittings.
This makes them very easy to install and guarantees their interchangeability with other similar pumps.

Reviews

There are no reviews yet.

Be the first to review “BV Series (Eaton Vickers)”

Your email address will not be published.

© 2019 Globetech All Rights Reserved.