Hydraulic fluid must have physical,lubricating and chemical properties.
suitable for use in hydraulic systems.
Screw type, they can be fitted directly into the cavity
in the actuator or in the integrated block.
All internal parts are hardened and ground or lapped
to ensure maximum reliability and resistance.
The bodies are made of high resistance extruded aluminium,
designed for high pressure hydraulic applications. (standard)
The bodies can also be made of steel.
Min/max flow-rate = 1/60 l/min. – 0.26/15.9 GPM
Max peak pressure = 450 bar – 6525 PSI
Max setting pressure = 350 bar – 5075 PSI
Standard Pilot Ratio = 4.25 : 1
Room Temperature = -30°C + 50°C
Oil Temperature = -30°C + 80°C
Recommended filtration = 30 micron